Ever since the introduction of the Moen brand in 1928, it’s been a household name for quality faucets and fixtures. With so many styles to choose from, you’re sure to find one that will look great in your bathroom.
That being said, there may be times when you want to replace an old handle or spout with a new one. It can be difficult if you don’t know how to remove Moen bathroom faucet handles correctly- but we have all the information you need!
Stay tuned for helpful tips on how to remove Moen bathroom faucet handles successfully and without any hassle whatsoever!
1. Use a wrench to loosen the nuts on the faucet handles
A wrench is a perfect tool for working with faucets. It can be used to loosen and tighten nuts on handles, as well as remove any old pieces of pipe that may be obstructing the flow of water.
The best way to use a wrench is by using a lever-action – one hand holding the handle while applying pressure with the other hand on the head of the wrench. The most important thing to remember when using a wrench is safety: always wear protective gloves and eye goggles before starting any work!
2. Remove the handle
One of the most common repairs a plumber will perform is removing the handle and spray head from the faucet body. This task requires a few tools, but it’s relatively straightforward for those who are experienced in plumbing.
For this project, you’ll need to have some basic understanding of how to remove, clean, and replace parts in your sink or kitchen faucet. In addition, you may want to have an appropriate pipe wrench that can be used to loosen any fittings that may be stuck during removal or replacement.
3. Disassemble each piece of hardware
The first step to disassembling any piece of hardware is using an adjustable wrench. The reason for this is that pliers can easily slip off the nut or bolt if you are not careful.
To use a wrench, make sure the gap in the head of it fits over your hardware and tighten the grip on it by rotating it clockwise until it won’t turn anymore.
If there’s excess space between your hand and socket, insert a crescent wrench into the opening and tighten with one hand while turning with another. This will ensure that there’s no chance of slippage from pliers when removing bolts or nuts from their sockets.
Disassembly should not be attempted without these tools as they provide more stability than other options available to consumers
4. Clean all parts
To ensure that your faucet handles are properly cleaned and maintained, use soap and water to make sure they’re clean. Then reassemble them in the correct manner when you put them back on!
5. Reattach everything
To reassemble the toy, put everything back together in the reverse order you took it apart.
6. Turn on the hot water at the sink for 30 seconds
Flushing out the pipes before installing new fixtures is a good idea. Turn on hot water for at least 30 seconds to clear debris from your sink.
Turn down the temperature to prevent scalding if needed
If you’re looking for a way to improve your faucet fixtures, this post is the place to start. We’ll show you how to remove and replace them with ease in just a few steps.
You can also get started by reading through our blog posts on plumbing tips for apartment renters, leaky pipes, or even fixing those annoying clogs!
With all of these resources at your fingertips, it’s never been easier to take control of what goes into and comes out of your home.